Title: Mitigating early-age cracking in thin UHPFRC precast concrete products using shrinkage-reducing admixtures 
Date Published: January-February 2016
Volume: 61
Issue: 1
Page Number: 39-50
Author(s): Doo-Yeol Yoo, Nemkumar Banthia, and Young-Soo Yoon
https://doi.org/10.15554/pcij.01012016.39.50

Click here to access the full journal article

Abstract

This study investigates the effects of shrinkage-reducing admixture (SRA) and cover depth on the shrinkage and surface-cracking behaviors of ultra-high-performance fiber-reinforced concrete (UHPFRC) slabs. Three different SRA–to–cement weight ratios of 0%, 1%, and 2%, and three different cover depths, 5, 10, and 20 mm (0.2, 0.4, and 0.8 in.), were considered using nine UHPFRC slabs with steel reinforcing bars. Three more unreinforced UHPFRC slabs with three different SRA ratios and four different depths were also fabricated for the comparisons. The use of SRA exhibited better behavior with regard to the decrease of shrinkage, maximum evaporation rate, and maximum surface-crack width. In addition, the application of a larger cover depth was favorable because it caused a lower degree of restraint, leading to a lower cracking potential and a higher surface-cracking resistance. Finally, the minimum required cover depth of the UHPFRC slab is suggested to be 1.3 times larger than the diameter of the upper steel reinforcing bar in order to prevent surface cracking.

References

Richard, P., and M. Cheyrezy. 1995. “Composition of Reactive Powder Concretes.” Cement and Concrete Research 25 (7): 1501–1511.

Kobler, M., and W. Sobek. 2008. “The Introduction of High Forces into Tine-Walled UHPC Elements by the Use of Implants.” In Proceedings of the Second International Symposium on Ultra High Performance Concrete, Kassel, Germany, March 05–07, 2008, 683–690. Kassel, Germany: Kassel University Press.

Perry, V., and G. Weiss. 2009. “Innovative Field Cast UHPC Joints for Precast Bridge Decks—Design, Prototype Testing and Projects.” In Proceedings of the International Workshop on Ultra High Performance Fibre Reinforced Concrete—Designing and Building with UHPFRC: State of the Art Development, 421-436. Marseille, France.

Kim, Y. J., S. Y. Park, J. S. Park, and B. S. Kim. 2013. “State-of-the-Art of UHPC Applications in the World.” Journal of Korean Society of Civil Engineering 61 (2): 39–50.

Yoo, D. Y., K. Y. Kwon, J. J. Park, and Y. S. Yoon. 2015. “Local Bond-Slip Response of GFRP Rebar in Ultra-High-Performance Fiber-Reinforced Concrete.” Composite Structures, no. 120: 53–64.

Yoo, D. Y., J. J. Park, S. W. Kim, and Y. S. Yoon. 2014. “Influence of Reinforcing Bar Type on Autogenous Shrinkage Stress and Bond Behavior of Ultra High Performance Fiber Reinforced Concrete.” Cement and Concrete Composites, no. 48: 150–161.

JSCE (Japan Society of Civil Engineers). 2004. Recommendations for Design and Construction of Ultra-High Strength Fiber Reinforced Concrete Structures (Draft). Tokyo, Japan: JSCE.

Habel, K., J. P. Charron, E. Denarie, and E. Bruhwiler. 2006. “Autogenous Deformations and Viscoelasticity of UHPFRC in Structures. Part 1: Experimental Results.” Magazine of Concrete Research 58 (3): 135–145.

Park, J. J., D. Y. Yoo, S. W. Kim, and Y. S. Yoon. 2013. “Drying Shrinkage Cracking Characteristics of Ultra-High-Performance Fibre Reinforced Concrete with Expansive and Shrinkage Reducing Agents.” Magazine of Concrete Research 65 (4): 248–256.

Yoo, D. Y., J. J. Park, S. W. Kim, and Y. S. Yoon. 2014. “Influence of Ring Size on the Restrained Shrinkage Behavior of Ultra High Performance Fiber Reinforced Concrete.” Materials and Structures 47 (7): 1161–1174.

Yoo, D. Y., K. H. Min, J. H. Lee, and Y. S. Yoon. 2014. “Shrinkage and Cracking of Restrained Ultra-High-Performance Fiber-Reinforced Concrete Slabs at Early Age.” Construction and Building Materials, no. 73: 357–365.

KSA (Korea Standard Association). 2009. Standard Test Method for Dry Shrinkage Crack in Concrete. KS F 2595. Seoul, Korea: KSA.

Bentz, D. P. 2008. “A Review of Early-Age Properties of Cement Based Materials.” Cement and Concrete Research 38 (2): 196−204.

ASTM Subcommittee C01.22. 2007. Standard Test Method for Flow of Hydraulic Cement Mortar. ASTM C1437. West Conshohocken, PA: ASTM International.

Saliba, J., E. Rozière, F. Grondin, and A. Loukili. 2011. “Influence of Shrinkage-Reducing Admixtures on Plastic and Long-Term Shrinkage.” Cement and Concrete Composites 33 (2): 209–217.

Yoo, D. Y., S. T. Kang, J. H. Lee, and Y. S. Yoon. 2013. “Effect of Shrinkage Reducing Admixture on Tensile and Flexural Behaviors of UHPFRC Considering Fiber Distribution Characteristics.” Cement and Concrete Research, no. 54: 180–190.

ASTM Subcommitee C09.23. 2008. Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance. ASTM C403/C403M. West Conshohocken, PA: ASTM International.

Yoo, D. Y., J. J. Park, S. W. Kim, and Y. S. Yoon. 2013. “Early Age Setting, Shrinkage and Tensile Characteristics of Ultra High Performance Fiber Reinforced Concrete.” Construction and Building Materials, no. 41: 427–438.

Pelisser, F., A. B. S. S. Neto, H. L. L. Rovere, and R. C. A. Pinto. 2010. “Effect of the Addition of Synthetic Fibers to Concrete Thin Slabs on Plastic Shrinkage Cracking.” Construction and Building Materials 24 (11): 2171–2176.

Yoo, D. Y., K. Y. Kwon, J. M. Yang, and Y. S. Yoon. 2015. “Effect of Cover Depth and Rebar Diameter on Shrinkage Behavior of Ultra-High-Performance Fiber- Reinforced Concrete Slabs.” Structural Engineering and Mechanics, under review.

Brooks, J. J., M. A. M. Johari, and M. Mazloom. 2000. “Effect of Admixtures on the Setting Times of High-Strength Concrete.” Cement and Concrete Composites 22 (4): 293−301.

Mora-Ruacho, J., R. Gettu, and A. Aguado. 2009. “Influence of Shrinkage-Reducing Admixtures on the Reduction of Plastic Shrinkage Cracking in Concrete.” Cement and Concrete Research 39 (3): 141–146.

Bentz, D. P. 2006. “Influence of Shrinkage-Reducing Admixtures on Early-Age Properties of Cement Pastes.” Journal of Advanced Concrete Technology 4 (3): 423–429.

Chen, H. L. R., and J. H. Choi. 2011. “Analysis of Shrinkage and Thermal Stresses in Concrete Slabs Reinforced with GFRP Rebars.” Journal of Materials in Civil Engineering 23 (5): 612–627.

Yoo, D. Y., N. Banthia, and Y. S. Yoon. 2015. “Effectiveness of Shrinkage-Reducing Admixture in Reducing Autogenous Shrinkage Stress of Ultra-High-Performance Fiber-Reinforced Concrete.” Cement and Concrete Composites, no. 64: 27–36.

Hossain, A. B., and W. J. Weiss. 2004. “Assessing Residual Stress Development and Stress Relaxation in Restrained Concrete Ring Specimens.” Cement and Concrete Composites 26 (5): 531–540.

Kyle, N. L. 2001. “Subsidence Cracking of Concrete Over Steel Reinforcement Bar in Bridge Decks.” MS thesis, Virginia Polytechnic Institute and State University, Blacksburg, VA.